Questions? Call Us

  • Guaranteed Fitment

    Best-in-class fitment data means you always get the right part for your car

  • In-House Experts

    We know our parts. We're here to help if you have questions about a purchase.

  • Installation Services

    Local to Southern California? Leave it to the experts to install your new parts.

  • International Shipping

    We offer affordable shipping rates, both for domestic and international shipments.

Rogue Engineering Aluminum Rear Shock Mounts - BMW E30, E36, E46

$ 99.00
Rogue Engineering Rear Shock Mount Set includes: Two (2) Rogue Engineering 6061-T6 CNC, Anodized Rear Shock...
$ 99.00

Rogue Engineering Aluminum Rear Shock Mounts - BMW E30, E36, E46

Rogue Engineering Rear Shock Mount Set includes:

  • Two (2) Rogue Engineering 6061-T6 CNC, Anodized Rear Shock Mounts
  • Four (4) Shore A 60 Rubber Bushings (stiffer TRACK versions available at extra cost) 
  • Two (2) 303 Stainless Steel Bushing Spacers (to be used with standard 10mm rear shocks, remove these for 12mm)
  • Four (4) 303 Stainless Steel Washers (2 required per mount)
  • Four (4) Yellow Zinc plated M8 serrated lock nuts
  • Two (2) Shock Tower Reinforcement Assemblies (with 10.9 hardware welded)
  • Two (2) factory gaskets

Rogue Engineering Rear Shock Mount
By producing a rear shock machined from 6061-T6 aluminum, we are able to attain a more stable and stiffer platform which to mount the top of the rear shock.  However, rather than use race-only spherical bearings or even overly stiff urethane bushings, we specify Shore A 60 hardness rubber bushings (approximately 30% stiffer than the factory bushings) to allow for street comfort and compliance.   Our findings show that overly stiff urethane bushings do not allow the rear shock to move, making the attachment of the lower part of the shock under strain.

The construction of the aluminum shock mount plate and orientation of the bushings makes it impossiblefor the bushings to "pop out" in the manner which the factory style mounts fail.  Since the bushings are rubber, when they require replacement, rebuilding them takes only a matter of minutes.  Only 4 bushings require replacement (for a pair of RSMs) and are available at extra cost.

Other important details include the use of 303 stainless steel components (compression washers and spacers) for long-lasting corrosion resistance.  All other hardware is metric, and either Grade 8 or better, treated with a yellow zinc plating, again for corrosion resistance.

Protection and Quick Installation/Removal
Another unique feature is the reinforcement assembly which secures the rear shock mount to the vehicle.  By reinforcing the top of the shock tower in the vehicle, it protect against the rear shock from ripping out the sheet metal.  

Additionally, the reinforcement has its hardware welded to it, allowing for the rear shock mount to become a bottom-mount design.  This means that if the rear shocks need to be removed, it only requires removing the two nuts and the single bolt at the bottom of the shock.  Once installed, there is no need to completely disassemble the trunk area to gain access.  If being used with a rear strut tower brace, the reinforcement assembly may be mounted from the bottom, so that the rear shock mount can be secured in the traditional manner.

The Rogue Engineering Rear Shock Mounts are designed to be used with standard 10mm shaft diameter rear shocks, but can also be used with 12mm shaft diameter shocks (shocks typically with top adjustments) with the use of optional top and bottom washers (or modifying the supplied ones, by opening them larger).  Simply removing the center stainless steel shaft of the assembly allows for the larger diameter shock to then be used.

Suspension Brand Rear Shock
Shaft Diameter
BMW OEM Shocks 10mm
H&R Coilovers 10mm
FK Coilovers 10mm
Raceland 10mm
ST Coilovers 10mm
KW Variant 1, 2, 3 10mm
Bilstein HD, Sport, PSS Coilvers 10mm
Koni Sport/Dinan 10mm
All AST 4XXX/5XXX Series 10mm
Tein (some) 12mm
TC Kline S/A or D/A 12mm
JRZ RS 12mm

The above list is meant as a guide.  If your application is not listed, measuring the OD of the rear shock shaft will determine how the RE RSM will need to be used to fit.

Read More
Read Less
Return Policy

Studio RSR only accepts cancellations within 24 hours of purchase.

For any products that are NOT Roll Bars, Roll Cages, Harness Bars, or Seat Deletes: To be eligible for a return, your item must be unused, in the same condition that you recieved it in, in the original packaging.

Several types of goods are exempt from being returned – such as; hazardous materials, flammable liquids or gases, consumables, roll cages, roll bars, harness bars, gift cards, and downloadable software.

All Studio RSR Roll Bars / Roll Cages / Seat Deletes are 100% Handmade made-to-order and Lead Times for production are an Estimate. Time is not of the essence. Studio RSR does not accept ANY cancellations after 24 hours of purchase.

International Shipping

We offer international shipping rates lower than most companies. Please note that, during checkout, the current rates and/or exchange tariffs may not be displayed.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×