***THIS PRODUCT IS NO LONGER AVAILABLE. WE APOLOGIZE FOR ANY INCONVENIENCE.***

Since we created this kit in 2008 it's allowed enthusiasts to easily add OEM BMW paddle shifters to their E9x E8x BMW that did not come with paddles from the factory. This kit includes a custom made time saving plug and play harness which enables factory paddle shift without cutting, splicing, programming or timely dealership visits. Separately purchase a steering wheel, paddle shifters and the necessary steering wheel controls (MF buttons) and plug in our harness. It's that simple. The retrofit can be performed with common tools in about 2 hours at home by following our step by step printed install guide. The necessary OEM part numbers are included in the guide. MADE IN USA with OEM BMW Connectors.

Paddle shifters will add more fun, value and performance to your BMW. Paddles shifters will Enhance your driving experience and allow you to safely change gears without your hands ever leaving the steering wheel. Paddles are activated by hitting a paddle in 2007 and newer vehicles. The gear you are in is displayed in the instrument cluster. Read our FAQ and install guide below.

This listing is for the plug & play harness only. In addition to the harness, install guide, and tech support we provide you with the OEM BMW part numbers required to complete the retrofit. You will also need to separately purchase a paddle shift steering wheel (one with cutouts for paddles), the paddle shifters, and the exact steering wheel control module (buttons on the wheel) we list below. (1 QTY.) Steering Wheel Controls/Switch BMW Part # 61319123287 They retail for $200.00 at your BMW retailer.

Update 11/28/17: If you use LCI paddles and modify them you may not need part # 61319123287. This only pertains to LCI modified paddles. SSG and E chassis DCT paddles (shown below) will require part # 61319123287.

The cost of the retrofit is about $400-$500 USD total if you get everything besides the harness used. ebay has many pre-owned steering wheels with paddles already in them. This listing is for the plug & play harness only. Beware of copies advertised as plugs and play where you have to remove pins. This is not "plug and play".

SSG and E chassis DCT paddles (shown below) will require part # 61319123287 steering wheel controls to work.

PLEASE READ BEFORE ORDERING: In addition to the harness, install guide, and tech support we provide you with the OEM BMW part numbers required to complete the retrofit. After receiving our harness you will also need to separately purchase a paddle shift steering wheel (one with cutouts for paddles), the paddle shifters, and the exact steering wheel control module (buttons on the wheel) we list in the install guide if using E chassis SSG or SMG paddles. We don't sell OEM parts. They must be sourced elsewhere.

Common Tools Needed

10mm Wrench/socket to disconnect the battery
Large flat head screwdriver (center console and steering column cover removal)
Medium flat head screwdriver (removing the airbag)
16mm socket with extension (steering wheel removal)
Wire coat hanger or equivalent to pull the harness through the dash T20 & T30 torx tools (steering wheel parts)

***THIS PRODUCT IS NO LONGER AVAILABLE. WE APOLOGIZE FOR ANY INCONVENIENCE.***