Questions? Call Us

  • Guaranteed Fitment

    Best-in-class fitment data means you always get the right part for your car

  • In-House Experts

    We know our parts. We're here to help if you have questions about a purchase.

  • Installation Services

    Local to Southern California? Leave it to the experts to install your new parts.

  • International Shipping

    We offer affordable shipping rates, both for domestic and international shipments.

Rogue Engineering Urethane Rear Trailing Arm Bushings (Race) - BMW E36, E46, 3 Series

$ 110.00
Problems with Factory MountsThe factory BMW RTABs (Rear Trailing Arm Bushings) are a very soft material...
$ 110.00

Rogue Engineering Urethane Rear Trailing Arm Bushings (Race) - BMW E36, E46, 3 Series

Problems with Factory Mounts
The factory BMW RTABs (Rear Trailing Arm Bushings) are a very soft material to provide the quietest, most comfortable ride possible.  Because of this, we have seen factory mounts require replacement in less than 50,000 miles and 3 years.  On modified vehicles, expect them to require replacement sooner.

Are your bushings already shot?
A simple test to determine if the stock rear trailing arm bushings require replacement is driving the vehicle in a straight line.  While in gear, under full acceleration, does the car pull to one side?  Additionally, under full, firm application of the brakes, does the car pull again?  If you answered yes to either one, the bushings probably require replacement.

Rogue Engineering Performance RTABs
The bushing material used in Rogue Engineering Performance RTABs are now available in two different compounds, specifically for your needs.  Both compounds now incorporate a silicone impregnated, polyurethane compound.  The biggest different being the hardness of the material.

BLUE - This harder compound is designed for TRACK applications, where monoball components are not allowed.  Less expensive than full Delrin bushings, these bushings are extremely stiff to provide the absolute maximum performance at the TRACK.  Purposefully engineered to approximately Shore D 65 hardness.

 

This hardness is important in this bushing especially in modified vehicles, since they will exert more force on the rear suspension during acceleration.

The inner sleeve that supports the bushings is made from 6061-T6 aluminum, CNC'd to exacting specifications for a perfect fit, here in the good 'ole USA.

Do NOT confuse these bushings with bushings produced outside of the US, with unknown material with questionable hardness.  We have installed similar bushings produced by other companies which are simply too soft.  In these cases, it would have been better if stock bushings were used since it allows too much movement of the rear trailing arm.

Which bushing is best for you?

Desired Performance Recommended Product Pros Cons
Factory-like
handling & ride
Factory OEM RTAB Just like stock No performance gain
Improved handling, factory ride RE Shims with OEM RTAB Quiet Very small handling improvement
Performance handling, firmer ride RE RTAB BLACK Slightly stiffer and longer lasting than OEM More expensive than OEM
Ultimate handling, firm ride RE RTAB BLUE Long lasting, ultimate performance Not as quiet and soft as stock
Maximum Performance Monoball RTAB No flex, race car performance Can transmit
NVH

Squeak, Squeak.  What was that noise?
New Feature!  Our manufacturer has has offered us a silicon based formula, to also keep the urethane bushings quiet during use.  Approximately 1.3 oz. of silicon is poured into the mold, which means that it is permanently impregnated into each bushing.  This process costs more to produce, but we feel that it makes for a better product in the long run.

A common downside of the urethane bushings over stock rubber ones was that they would typically develop noise over time (or even right away).  These noises were from a combination of the harder material, inadequate lubrication (or none at all), and the contact with the factory steel mounting hat rubbing against the bushing.  

A new, exclusive feature now incorporated into the Rogue Engineering RTABs is our new machined "grease trap".  You can see this "grease trap" (picture 1), which is the small area around the end of the aluminum pin.  This allows for lubricant to be remain captive during the installation of the bushings (picture 2) instead of being scraped off by the factory steel mounting hat.  Rogue Engineering is the only company on the market to introduce a novel solution such as this to reduce the noise without sacrificing the performance.

Professional Installation Required
Because the RTAB "console" removal is required, an alignment is recommended.  For installation of the part itself, it is very straightforward, but requires some special tools:

 Rogue Engineering Urethane RTAB Bushings

Because of the unique design, installation of the bushings is much easier than factory bushings.

Read More
Read Less
Return Policy

Studio RSR only accepts cancellations within 24 hours of purchase.

For any products that are NOT Roll Bars, Roll Cages, Harness Bars, or Seat Deletes: To be eligible for a return, your item must be unused, in the same condition that you recieved it in, in the original packaging.

Several types of goods are exempt from being returned – such as; hazardous materials, flammable liquids or gases, consumables, roll cages, roll bars, harness bars, gift cards, and downloadable software.

All Studio RSR Roll Bars / Roll Cages / Seat Deletes are 100% Handmade made-to-order and Lead Times for production are an Estimate. Time is not of the essence. Studio RSR does not accept ANY cancellations after 24 hours of purchase.

International Shipping

We offer international shipping rates lower than most companies. Please note that, during checkout, the current rates and/or exchange tariffs may not be displayed.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×